Description
3. Key Technical Specifications
|
Parameter
|
Specification
|
|---|---|
|
Cable Length
|
3 meters (10 feet)
|
|
Connector Type
|
One end: 24-pin right-angle D-sub (Fujitsu FCN-365S024-AU)
Other end: Pre-stripped 24 AWG wires |
|
Current Rating
|
1.2 amps per conductor (max)
|
|
Compatibility
|
Series 90-30 32-point I/O modules (e.g., IC694MDL654, IC694MDL752)
|
|
Shielding
|
Unshielded (internal cabinet use)
|
|
Operating Temperature
|
-20°C to +60°C (-4°F to 140°F)
|
|
Certifications
|
UL, CE
|
|
Depth Clearance
|
2 inches (51 mm) from module front panel
|
IC693CBL300
4. Product Introduction
The GE IC693CBL328 is a 24-pin right-angle I/O interface cable engineered for GE Series 90-30 PLC systems. It connects high-density 32-point I/O modules to field devices, featuring pre-stripped wires for rapid terminal block installation.
Core Advantages:
-
Space Efficiency: The right-angle connector reduces front-panel clearance by 40%, ideal for compact cabinets.
-
Signal Integrity: 1.2A per conductor supports high-current loads (e.g., relays, solenoids).
-
Durability: Military-grade construction withstands industrial vibration and EMI.
5. Firmware/Software Versions & Upgrade Notes
-
Configuration Tools: No firmware updates required. Use LogicMaster 90-30 or VersaPro (IEC 61131-3) for I/O mapping.
-
Compatibility: Works with all Series 90-30 CPUs (e.g., IC693CPU350). Verify module pinout alignment.
-
Upgrade Risks: None for the cable. PLC firmware upgrades may require revalidating I/O configurations.
IC693CBL300
6. Frequently Asked Questions (FAQ)
1. Can this cable handle high-voltage applications?
No. Rated for 600V AC/DC, suitable for low-voltage I/O signals (e.g., 24V DC sensors). For power transmission, use shielded cables (e.g., IC693CBL330).
2. Is this cable compatible with analog I/O modules?
Yes, but ensure voltage compatibility (e.g., ±10V DC). Use shielded cables for analog signals to minimize noise.
3. Does the cable support hot-swapping?
No. Power down the PLC rack before connecting/disconnecting to avoid signal errors or damage.
4. Warranty & Quality Assurance
-
12-month warranty covering manufacturing defects (e.g., broken connectors).
-
QC checks: Incoming traceability, 24h load tests, and megger insulation tests (>10MΩ).
5. Why choose New Surplus over refurbished?
-
Guaranteed compatibility: Unmodified OEM specs.
-
Full testing: Validated for 1.2A current rating and connector durability.
-
Risk mitigation: Refurbished units often lack calibration backups or have degraded shielding.
6. How do I terminate the pre-stripped wires?
Terminate to terminal blocks (e.g., IC693ACC337) using screw terminals. Strip 0.25 inches (6.35 mm) of insulation and tighten screws to 5 in-lbs (0.56 N·m).
7. What’s the replacement part number for damaged cables?
Use IC693CBL328B (exact replacement) or IC693CBL328S (shorter 1-meter version).
