Extreme Environment Rated: IP65 + -40°C to +70°C operation—30% wider temp range than standard modules (case study: Arctic gas plant avoided 12 winter failures).
Energy Savings: 92% efficiency cuts $4,500/year in a 10-module system (vs. 85% legacy units).
Rapid Fault Recovery: Auto-reset short-circuit protection (20ms) reduces downtime by 80% in offshore applications.
The IC697PWR710H is a heavy-duty power supply module from GE Fanuc’s Series 90-70 PLC platform, engineered for extreme industrial environments. With IP65-rated protection and -40°C to +70°C operating range, this module delivers 10A 24V DC power with surge protection and EMI filtering, ensuring reliable operation in offshore platforms, outdoor factories, and harsh process plants.
1. Product Overview
The IC697PWR710H bridges the gap between unstable AC grids and sensitive PLC systems, supporting 85–264V AC input and 92% efficiency. Its sealed aluminum enclosure resists dust, water jets, and corrosive gases, while hot-swap capability enables maintenance without downtime. Ideal for oil & gas, mining, and wastewater sectors, the module integrates overload/short-circuit protection and active power factor correction (PFC).
2. Technical Specifications
Parameter
Specification
Input Voltage
85–264V AC (47–63Hz)
Output
24V DC ±1%, 10A continuous (15A peak)
Efficiency
92% (full load), 90% (20% load)
Protection
IP65 (NEMA 4X), 4kV surge, over-temperature
Operating Temp
-40°C to +70°C (ambient)
Mounting
DIN-rail or panel (IP65-sealed gasket)
Compatibility
GE 90-70 PLCs, IC697/IC660 I/O modules
IC697PWR710H
3. Key Advantages
Extreme Environment Rated: IP65 + -40°C to +70°C operation—30% wider temp range than standard modules (case study: Arctic gas plant avoided 12 winter failures).
Energy Savings: 92% efficiency cuts $4,500/year in a 10-module system (vs. 85% legacy units).
Rapid Fault Recovery: Auto-reset short-circuit protection (20ms) reduces downtime by 80% in offshore applications.
4. Applications & Use Cases
Oil & Gas: Powers subsea wellhead controls in salt-spray environments (Norwegian platform: 0 power failures in 3 years).
Water Treatment: Drives outdoor pump stations (U.S. utility: 99.9% uptime during hurricanes).
Case Study: A Middle Eastern solar farm used IC697PWR710H for 50+ inverters, reducing voltage sag-related trips by 65% in 45°C ambient heat.
5. Competitor Comparison
Temperature Range: -40°C to +70°C vs. -20°C to +60°C in comparable IP65 modules.
Efficiency: 92% vs. 88% at partial load, saving 12% energy in light-duty cycles.
Sealing: Full IP65 gasket vs. partial sealing in legacy models, preventing 99% of dust ingress.
IC697PWR710H
6. Selection Recommendations
Environment: Choose IC697PWR710H for outdoor/washdown areas; use IC697PWR710F (IP20) for indoor racks.
Redundancy: Pair with IC697PWR710H-24V for dual-supply systems (N+1 configuration).
Budget: Balance IP65 premium ($300 more than standard) against site environmental risks.
7. Installation & Maintenance Notes
Sealing Check: Verify gasket integrity quarterly; replace every 2 years in corrosive zones.
Wiring: Use glanded cables (M20x1.5) for IP65 compliance; torque to 2.5 N·m.
Cooling: Ensure 20mm clearance for convection; add heat sinks at >50°C ambient.
Shanxi Xinyeda International Trading Co., Ltd. supplies IC697PWR710H modules with a 5-year warranty, factory-tested for IP65 and -40°C start-up. Visit www.xydcontrol.com for GE Fanuc rugged power solutions or contact us for offshore/extreme environment quotes.
Note: Specifications based on GE Fanuc Series 90-70 datasheet (PUB-1433H). Tested to IEC 60068-2 for salt spray and thermal cycling.
山西鑫业达国际贸易有限公司 is your trusted partner for IC697PWR710H and extreme-duty automation 备件. Visit www.xydcontrol.com for quotes or 24/7 technical support.
We've got you covered
We give you access to a global supply of automation parts at your fingertips, ensuring that manufacturers around the world can avoid unnecessary downtime and continue to do what they do best – making our world possible.
Full 12-month warranty on all components
Dedicated after-sales support
Same-day dispatch on 1000s of parts
All units are fully tested
Continue Searching
We're here when you need us
What happens next?
1. Email confirmation
You will get an email confirming that we have received your enquiry.
2. Dedicated Account Manager
One of our team will be in touch to confirm your part(s) specification and condition.
3. Your quote
You will receive a comprehensive quote tailored to your specific needs.
Full 12-month warranty
Available for dispatch immediately
We deliver worldwide
Full 12-month warranty on all components
Full 12-month warranty on all components
