TheGE Fanuc IC660EPM100J is a high-performance power monitoring module designed for industrial and energy management systems, part of the Genius I/O family. It monitors voltage/current inputs (via potential/current transformers) and calculates critical parameters like active power, reactive power, power factor, and kilowatt-hours. Supporting both single-phase and delta-configured 3-phase systems, the IC660EPM100J converts analog data into digital signals for real-time monitoring via Modbus TCP/RTU or Genius Bus. With dual power inputs (115/230V AC or 125V DC) and isolated channel design, it ensures stable operation in harsh environments. The module integrates with GE’s control platforms (e.g., RX3i, RX7i) and supports remote configuration via a Genius Handheld Monitor (HHM).
2. Technical Parameters
Parameter
Specification
Power Supply
115/230V AC (50/60Hz) or 125V DC
Input Signals
Voltage (1–3 PTs), Current (3 CTs + neutral CT)
Calculated Parameters
Active/reactive power, power factor, kWh, RMS voltage/current
Communication
Genius Bus (up to 7500 ft), Modbus TCP/RTU
Update Rate
2 times/second (data transmission)
Operating Temperature
0°C to +60°C (32°F to 140°F)
Storage Temperature
-40°C to +125°C (-40°F to 257°F)
Dimensions
11.25 × 14.5 × 9 in (electronics assembly)
Weight
141.44 oz (8.84 lbs)
Isolation
Channel-level isolation (IEC 61000-4-5)
3. Advantages and Features
Multi-Protocol Support: Seamless integration with Modbus TCP/RTU and Genius Bus for flexible system design.
Precision Monitoring: 14-bit ADC ensures ±0.5% accuracy in power parameter calculations.
Dual Power Redundancy: Accepts AC/DC inputs for uninterrupted operation in diverse power environments.
Remote Access: Configurable via HHM or host PLC; stores waveform data for offline analysis.
Wide Compatibility: Works with single-phase and 3-phase systems (delta configuration).
IC660EPM100J
4. Application Fields and Use Cases
Industries: Power generation, manufacturing, water treatment, smart grids. Scenarios: Substation monitoring, energy management, load balancing. Case Study: A manufacturing plant deployed IC660EPM100J modules to monitor 10 distribution lines. Real-time power factor correction reduced energy waste by 15%, while remote diagnostics cut downtime by 20%.
5. Competitor Comparison
Compared to similar modules:
Dual Power Flexibility: Supports both AC/DC inputs (many alternatives offer single power type).
Long-Distance Communication: Operates up to 7500 ft from the host (vs. 500–1000 ft in standard models).
Integrated Waveform Storage: Stores raw data for post-fault analysis (basic models lack this feature).
6. Selection Recommendations
Power Requirements: Match input voltage (AC/DC) and current transformer ratings (e.g., 5A CTs).
System Scale: Choose for 3-phase systems; use single-phase modules (e.g., IC660EPM100) for simpler setups.
Environment: Ensure temperature (0°C to +60°C) and humidity (5–95% non-condensing) align with site conditions.
Compatibility: Verify Genius Bus compatibility (e.g., GE RX3i/RX7i chassis).
7. Precautions
Wiring Safety: Use shielded cables for CT/PT inputs; follow terminal block polarity guidelines.
Power Stability: Ensure clean power supply to avoid signal interference (voltage sags >10% may cause errors).
Calibration: Factory-calibrated; recheck annually or after transformer replacement.
Hot Swap: Do not remove the electronics assembly while powered (no hot-swap support).
Shanxi XinyeDa International Trade Co., Ltd. is your trusted partner for GE Fanuc IC660EPM100J and other automation spare parts. We provide sales, technical support, and customized solutions. Visit www.xydcontrol.com or contact us for expert assistance.
We've got you covered
We give you access to a global supply of automation parts at your fingertips, ensuring that manufacturers around the world can avoid unnecessary downtime and continue to do what they do best – making our world possible.
Full 12-month warranty on all components
Dedicated after-sales support
Same-day dispatch on 1000s of parts
All units are fully tested
Continue Searching
We're here when you need us
What happens next?
1. Email confirmation
You will get an email confirming that we have received your enquiry.
2. Dedicated Account Manager
One of our team will be in touch to confirm your part(s) specification and condition.
3. Your quote
You will receive a comprehensive quote tailored to your specific needs.
Full 12-month warranty
Available for dispatch immediately
We deliver worldwide
Full 12-month warranty on all components
Full 12-month warranty on all components
