NI PCI-6733

Abundant Output Channels: The NI PCI-6733 stands out with its 32 analog output channels, allowing users to simultaneously generate multiple analog signals. In a large – scale industrial control system, it can be used to control the operation of 32 different valves, motors, or other actuators, streamlining the control process and reducing the need for multiple analog output modules. This high channel count not only simplifies system design but also enhances the overall efficiency of the control system by enabling coordinated control of multiple devices.

Versatile Output Ranges: The support for multiple output ranges makes the PCI-6733 highly adaptable to different applications. For instance, in a power electronics experiment, the -10 V to 10 V output range can be used to supply bipolar voltage signals to test circuits, while the current output ranges (0 mA to 20 mA, 4 mA to 20 mA) are suitable for driving current – controlled devices like certain types of sensors or actuators. This versatility eliminates the need for additional signal conversion equipment in many cases, saving costs and reducing system complexity.

Decent Resolution and Update Rate: With a 12 – bit resolution, the NI PCI-6733 provides a reasonable level of accuracy for most common analog output applications. It can represent a sufficient number of discrete levels to generate smooth and precise analog signals. The update rate of up to 100 kS/s allows for the generation of dynamic analog waveforms, making it suitable for applications that require rapid changes in the output signal, such as in audio signal generation or in simulating varying physical quantities over time in a test setup.

Integrated Digital I/O for Enhanced Control: The inclusion of 8 digital I/O lines on the PCI-6733 adds an extra layer of functionality. These digital lines can be used to control external devices, trigger events, or monitor the status of the analog output channels. In an automated test system, for example, the digital I/O lines can be used to start and stop the data acquisition process based on the analog output signals, or to indicate when a certain output level has been reached, enabling more complex and coordinated operation of the entire system.

Reliable PCI Interface: The 32 – bit/33 MHz PCI interface of the NI PCI-6733 ensures stable and reliable data transfer between the module and the host computer. This interface is widely supported in many computer systems, making it easy to integrate the module into existing setups. It provides a consistent data transfer rate, which is crucial for maintaining the integrity of the analog output signals, especially when generating high – speed or complex waveforms.

Manufacturer:
Part number: NI PCI-6733
Our extensive catalogue, including : NI PCI-6733 , is available now for dispatch to the worldwide.
  • Full 12-month warranty
  • Available for dispatch immediately
  • We deliver worldwide

Description

NI PCI – 6733 Product Description

Detailed parameter table

Parameter name Parameter value
Product model PCI-6733
Manufacturer National Instruments (NI)
Product category Analog output module
Number of channels 32 analog output channels
Output range -10 V to 10 V, 0 V to 10 V, 0 mA to 20 mA, 4 mA to 20 mA
Resolution 12 – bit
Update rate Up to 100 kS/s
Output load impedance 1 kΩ for voltage output, 500 Ω for current output
Digital I/O lines 8 digital I/O lines for control and status monitoring
PCI interface 32 – bit/33 MHz PCI interface
Dimensions 16.76 cm (W) x 10.16 cm (D) x 1.78 cm (H)
Power consumption 8 W typical
Operating temperature 0 °C – 55 °C
Storage temperature -40 °C – 70 °C
NI PCI-6733

NI PCI-6733

Product introduction

The NI PCI-6733 is a high – performance analog output module developed by National Instruments (NI), designed to meet the diverse needs of analog signal generation in measurement and control systems. With 32 analog output channels, it offers extensive capabilities for creating a wide variety of analog signals, making it an ideal choice for applications ranging from industrial automation to scientific research.

The module supports multiple output ranges including -10 V to 10 V, 0 V to 10 V for voltage outputs, and 0 mA to 20 mA, 4 mA to 20 mA for current outputs, providing flexibility to interface with different types of devices. Its 12 – bit resolution ensures accurate representation of analog values, while the update rate of up to 100 kS/s enables the generation of dynamic analog signals. The inclusion of 8 digital I/O lines facilitates control and status monitoring, and the 32 – bit/33 MHz PCI interface ensures stable data transfer between the module and the host computer. Whether it’s controlling actuators in an industrial process, generating test signals in a laboratory, or simulating analog inputs in a training system, the NI PCI-6733 provides a reliable and efficient solution for analog output requirements.

Core advantages and technical highlights

Abundant Output Channels: The NI PCI-6733 stands out with its 32 analog output channels, allowing users to simultaneously generate multiple analog signals. In a large – scale industrial control system, it can be used to control the operation of 32 different valves, motors, or other actuators, streamlining the control process and reducing the need for multiple analog output modules. This high channel count not only simplifies system design but also enhances the overall efficiency of the control system by enabling coordinated control of multiple devices.

Versatile Output Ranges: The support for multiple output ranges makes the PCI-6733 highly adaptable to different applications. For instance, in a power electronics experiment, the -10 V to 10 V output range can be used to supply bipolar voltage signals to test circuits, while the current output ranges (0 mA to 20 mA, 4 mA to 20 mA) are suitable for driving current – controlled devices like certain types of sensors or actuators. This versatility eliminates the need for additional signal conversion equipment in many cases, saving costs and reducing system complexity.

Decent Resolution and Update Rate: With a 12 – bit resolution, the NI PCI-6733 provides a reasonable level of accuracy for most common analog output applications. It can represent a sufficient number of discrete levels to generate smooth and precise analog signals. The update rate of up to 100 kS/s allows for the generation of dynamic analog waveforms, making it suitable for applications that require rapid changes in the output signal, such as in audio signal generation or in simulating varying physical quantities over time in a test setup.

Integrated Digital I/O for Enhanced Control: The inclusion of 8 digital I/O lines on the PCI-6733 adds an extra layer of functionality. These digital lines can be used to control external devices, trigger events, or monitor the status of the analog output channels. In an automated test system, for example, the digital I/O lines can be used to start and stop the data acquisition process based on the analog output signals, or to indicate when a certain output level has been reached, enabling more complex and coordinated operation of the entire system.

Reliable PCI Interface: The 32 – bit/33 MHz PCI interface of the NI PCI-6733 ensures stable and reliable data transfer between the module and the host computer. This interface is widely supported in many computer systems, making it easy to integrate the module into existing setups. It provides a consistent data transfer rate, which is crucial for maintaining the integrity of the analog output signals, especially when generating high – speed or complex waveforms.

NI PCI-6733

NI PCI-6733

Typical application scenarios

In industrial automation, the NI PCI-6733 is commonly used for process control. In a chemical plant, it can be employed to control the flow rate of chemicals by adjusting the position of valves through its analog output channels. The multiple output ranges allow for precise control, ensuring that the chemical processes occur under the optimal conditions. The digital I/O lines can be used to monitor the status of safety interlocks and other control devices, enhancing the overall safety and efficiency of the production process.

In scientific research laboratories, the PCI-6733 is valuable for generating test signals. In an electronics research project, it can be used to generate various voltage and current waveforms to test the performance of electronic circuits. Researchers can precisely control the amplitude, frequency, and shape of the output signals using the module’s resolution and update rate capabilities. The digital I/O lines can be used to synchronize the signal generation with other experimental equipment, enabling more accurate and repeatable experiments.

For educational purposes, the NI PCI-6733 serves as an excellent teaching tool in courses related to electronics, control systems, and instrumentation. Students can use it to build hands – on projects, such as creating a simple closed – loop control system or generating audio signals. By working with the module, students can gain a practical understanding of analog signal generation, digital – to – analog conversion, and system integration, enhancing their learning experience and technical skills.

Related model recommendations

  1. NI PCIe – 6733R: An updated version of the PCI-6733, featuring a PCI Express interface for faster data transfer rates. It also offers enhanced features such as improved accuracy and stability, making it suitable for more demanding applications that require high – speed and precise analog output, like in high – end industrial testing or advanced research projects.
  2. NI PXI – 6733: A PXI – based analog output module with similar functionality to the PCI-6733, but designed for use within the PXI platform. It provides better integration and synchronization capabilities when used in a PXI – based measurement and control system, making it ideal for complex, modular setups where multiple modules need to work together seamlessly.
  3. NI USB – 6723: A USB – based alternative, offering portability and ease of setup. While it may have a lower channel count and data transfer rate compared to the PCI-6733, it is suitable for applications where mobility is a priority, such as in field – based testing or educational demonstrations.
  4. NI PCI – 6723: A cost – effective option with fewer analog output channels (16 channels) compared to the PCI-6733. It is suitable for applications with less demanding requirements, where a smaller number of analog output channels are sufficient, like in small – scale control systems or basic laboratory experiments.
  5. NI PCIe – 6743: A high – end analog output module with a higher resolution (16 – bit) and more advanced features, such as support for complex waveforms and advanced triggering options. It is designed for applications that demand the highest level of accuracy and flexibility in analog signal generation, such as in precision measurement systems or high – performance audio equipment testing.

Installation, commissioning and maintenance instructions

Installation preparation: Before installing the NI PCI-6733, ensure that your computer is powered off and disconnected from the power source. Open the computer case and locate an available 32 – bit/33 MHz PCI slot. Take proper electrostatic – discharge (ESD) precautions, such as wearing an ESD wrist strap, to protect the module during handling. Carefully align the PCI-6733 with the PCI slot and gently push it in until it is fully seated and the retention mechanism locks it in place. Connect any necessary external cables for the analog output and digital I/O connections according to your application requirements. Close the computer case, reconnect the power source, and then install the necessary device drivers and software provided by NI to enable communication between the module and your computer.

Maintenance suggestions: Regularly check the status of the PCI-6733 through the NI – provided software. Monitor for any error messages or abnormal behavior, such as incorrect output values, dropped samples, or communication issues with the computer. Keep the computer and the module in a clean and dust – free environment, as dust accumulation can affect the heat dissipation and performance of the module. Periodically update the device drivers and firmware of the PCI-6733 as new versions are released by NI to ensure compatibility with the latest operating systems and software, as well as to benefit from performance improvements and bug fixes. In case of any problems, refer to the troubleshooting guide in the product manual or contact NI’s technical support for assistance. When replacing any components related to the module, use only genuine NI parts to maintain the reliability and performance of the PCI-6733.

Service and guarantee commitment

We have full confidence in the quality and reliability of the NI PCI-6733. The product comes with a comprehensive warranty that covers any manufacturing defects. During the warranty period, if the PCI-6733 fails to perform as specified, we will repair or replace it free of charge. Our dedicated technical support team is available around the clock to assist customers with installation, commissioning, and any technical issues that may arise. We offer a wide range of online resources, including detailed user manuals, software drivers, and application notes, to help users make the most of the PCI-6733. Additionally, we are committed to continuous product improvement and regularly release firmware updates and technical enhancements to ensure that the PCI-6733 remains a leading – edge solution in the analog output module market, providing our customers with reliable and high – performing solutions for their measurement and control needs.

 

We've got you covered
We give you access to a global supply of automation parts at your fingertips, ensuring that manufacturers around the world can avoid unnecessary downtime and continue to do what they do best – making our world possible.
  • Full 12-month warranty on all components
  • Dedicated after-sales support
  • Same-day dispatch on 1000s of parts
  • All units are fully tested
Continue Searching
We're here when you need us
What happens next?
  • 1. Email confirmation
    You will get an email confirming that we have received your enquiry.
  • 2. Dedicated Account Manager
    One of our team will be in touch to confirm your part(s) specification and condition.
  • 3. Your quote
    You will receive a comprehensive quote tailored to your specific needs.